Understanding why your faucet is dripping can save you a lot of stress. A leaky faucet may seem like a minor plumbing issue, but it can be quite annoying. In addition, it can waste a significant amount of water and drive up your utility bills. Even for a small water faucet leak, the loss of water from a malfunctioning faucet can be up to 3 gallons a day.
Major leaks can make you lose 30 gallons of water a day. The most common causes of a leaky faucet involve the wear and tear of its internal components over time. However, certain other factors can also contribute to the problem. The timely water pipe repair service of a dripping faucet can help prevent the unnecessary waste of a precious resource and help you avoid unforeseen utility expenses.
A variety of reasons can explain why your faucet is dripping. Here are the usual suspects.
Damaged Washer
When trying to find the primary cause of dripping faucet issues, a broken washer is possibly the most common cause of a dripping faucet. This problem occurs in compression faucets. A washer is one of the components that is exposed to the highest rate of wear and tear. It rests against the valve seat, and when the water is turned on, it is pushed back against the valve seat.
The repetitive friction causes significant deterioration over time. Another washer issue that explains what causes the faucet to drip is if the washer was not installed properly or if it is the wrong size. Both these factors lead to the seal not being watertight. This can cause water to leak out of the faucet body and into the spout even when the faucet is not in use.
Damaged O-Ring
If you observe a leak around the base or handles, the reason could be a worn-out O-ring. This problem occurs in cartridge faucets. Many local homeowners ask what is causing their cartridge faucet to leak. An O-ring is a small rubber ring or gasket that is attached to the stem screw that keeps the handle in place.
If it wears out or loosens, water leaks into the stem and out through the handle when the faucet is not in use. It can cause hot and cold water to mix due to the cartridge not being sealed properly. Furthermore, if the faucet leaks at the base when turned on, it is a clear sign that the O-ring at the base of the spout is loose or damaged.
Corroded Valve Seat or Cartridge
Thinking about what causes a dripping faucet? The valve seat connects the spout to the body of the faucet. The most common reason for a corroded valve seat is exposure to mineral deposits and sediments. Since these are moving parts, scratches due to friction can also damage the valve seat.
If the valve seat is removable, a professional plumber will detach it and clean it with a solution to remove hard water deposits. Scratches can be gotten rid of by sanding down the valve seat. For a fixed valve seat, a seat sleeve can be purchased and fitted on top to compensate for the loss of seal from the corroded valve seat.
If the extent of the damage is significant, it is better to replace the valve seat. The cartridge regulates the water flow in a single-handle faucet by mixing hot and cold water according to the handle position. A corroded or worn-out cartridge can cause leaks and will need to be replaced.
External Damage
Sometimes, the leak may occur due to damaged or malfunctioning parts that are outside the faucet but connected to it. When considering what are the possible causes of a leaky faucet, you must look at the power of water pressure. One example is a broken pipe. If there is a broken pipe or damaged pipe fitting in the pipes that supply water to the faucet, that could be an external cause for the faucet leaking.
Water pressure can also be an external cause. A clear indication that high water pressure is causing the leak is if the faucet drips only at certain times of the day instead of constantly. A leak that occurs at specific handle positions is also a sign that water pressure is the cause. When water pressure is too high, it can create a backup and cause water to leak out through gaps in the faucet setup.
Note that these same pressure issues are often what cause a leaking bathtub faucet in older Portland homes. This can be a telltale sign of a larger problem waiting to happen. Unusually high water pressure can damage major parts of your plumbing and cause flooding.
Frequently Asked Questions
What are the possible causes of a leaky faucet?
Beyond simple washers, what causes a dripping faucet can range from a corroded valve seat to high water pressure in your main lines. If you have a cartridge model, what is causing my cartridge faucet to leak? It is usually a failing O-ring or a mineral-clogged cartridge. Diagnosing a water faucet leak early is the best way to prevent a spendy repair bill later.
Why does my faucet drip only at night?
If you are wondering why is my faucet is dripping during the late hours, it is likely due to a spike in water pressure. As water usage drops across the community at night, the pressure in the pipes can increase. This identifies what causes faucet to drip when the internal seals are already slightly weakened.
Why Call for Professional Leak Repair?
At Central Air Heating, Cooling & Plumbing, we’ve been serving the residents of the Clackamas area since 2001. Our highly skilled and trained plumbers can handle any requirement you have, including pipe, faucet, toilet or shower repairs or installations. We also repair and replace water heaters and garbage disposals.
In addition to plumbing, we provide heating and cooling services that include the installation, repair and maintenance of furnaces and air conditioners. You can also count on us to perform indoor air quality assessments. Call us today to schedule an appointment.
